Disco
DAD 3241 Automatic Dicing
The Disco DAD 3241 Automatic Dicing Saw is a manual cutting machine for 8-inch workpieces. The Disco DAD 3241 Automatic Dicing Saw has a single spindle. The Disco DAD 3241 Automatic Dicing Saw has a rated spindle output of 1.8 kW.[1]
What it is
How it works
The DAD 3241 has a single spindle, and the spindle rated output is 1.8 kW at 60,000 min-1.[1]
Where it fits in the process flow
The DAD 3241 is specified for an 8-inch class workpiece and can accept a maximum workpiece size of Φ8 inch.[1]
What do the numbers mean?
Power & electrical1
Wafer handling1
- Anti-soiling porous chuck table for DTF2-8-1 for 8"[2]
Performance1
Dimensions & facilities2
Configuration & options16
- Starter kit for 2" hub mount set[2]
- Starter kit for R-type flange set[2]
- Stylus pen magnet fixing type[2]
- Pipe band for 15.0 mm OD[2]
- Braided hose 9.0 mm ID x 15.0 mm OD[2]
- Wheel cover (SUS type) Deep cutting type[2]
- Macro-Mag Microscope (0.75x/1/3CCD Type/Approx. 30X/4.8mm)[2]
- General tool set[2]
- Lifting jig set forklift + crane[2]
- Power cable 5m[2]
- Non-contact setup[2]
- Abrasive material for non-contact setup sensor[2]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Spindle rated output1.8 kW at 60,000 min-1[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
How is cut precision achieved in this class of machine?General reference — not yet source-verified
Precision is achieved through a combination of a thin diamond blade, controlled feed rate, and multi-axis positioning systems that ensure accurate depth and path control. Coolant further stabilizes the cutting environment.
What factors influence blade selection for a given application?General reference — not yet source-verified
Blade grit size, bond type, and thickness affect cut speed, edge quality, and kerf width. Coarser grits cut faster but may leave a rougher edge, while finer grits produce a smoother surface.
How does automation improve the cutting process?General reference — not yet source-verified
Automation allows multiple cuts to be performed with consistent, programmable parameters, reducing operator intervention and enhancing repeatability across batches.
Not publicly documented
The following facts about the DAD 3241 Automatic Dicing are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DAD 3241 Automatic Dicing are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the DAD 3241 Automatic Dicing are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the DAD 3241 Automatic Dicing are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DAD 3241 Automatic Dicing are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DAD 3241 Automatic Dicing is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]web.archive.org — disco.co.jp (Apr 11, 2026)web.archive.org
- [2]Inventory photo
Last updated Oct 3, 2026.
Compare with similar tools
View all →
The Lapmaster Model 15 is a bench-mounted unit with a rigid, lightweight, cast aluminum base, of the 'ring lapper' configuration, enabling high standards of flatness and surface finish.
General referenceThe Blanchard 18 D Surface is a vertical-spindle rotary-table surface grinding machine used to produce flat, parallel surfaces on metal workpieces.
The Blanchard 20 36 Surface is a surface grinder used in dicing and grinding applications.
