Nikon
Optistation 7
What it is
How it works
General reference — not yet source-verifiedAn optical review system inspects patterned surfaces with optical imaging so an operator can examine defects, verify process results, and support manufacturing control.
Optical review tools generally form an image of a wafer surface under controlled illumination and magnification, then use a stage to position the wafer and optics to capture detail at selected locations.
Where it fits in the process flow
General reference — not yet source-verifiedAn optical review system belongs to the inspection and metrology side of a fab rather than to primary processing.
An optical review system typically supports the inspection loop after fabrication steps that may create surface defects or process anomalies, and it helps confirm findings from broader defect screening.
Why won't it start?
Documented failure modes, common issues, and field considerations.
- Some missing parts
What do the numbers mean?
Power & electrical6
Optics & imaging1
Configuration & options8
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What electrical requirements does the Optistation 7 have?
The Optistation 7 requires 208 VAC, single phase, 2 wire plus ground, 50/60 Hz, with a full load of 16 A, a machine main breaker rating of 20 A, and a largest motor load of 6 A.[1][2][3]
Is the Optistation 7 categorized as a precision optics tool?
Yes, the Optistation 7 is categorized as a precision optics instrument.[3]
Not publicly documented
The following facts about the Optistation 7 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Optistation 7 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Optistation 7 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Optistation 7 are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the Optistation 7 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the Optistation 7 are on record.
Answerable by: an OEM parts catalog or a service engineer
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Inventory photo
- [3]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 7, 2026.
Compare with similar tools
View all →
The Perkin Elmer 1050 UV-VIS Spectrometer is an instrument used for analyzing ultraviolet and visible light absorption spectra.
The Agilent 11980 A is a fiber optic interferometer for precision optical measurements.