MPM
UP 3000
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
Vacuum
90 psi @ 10 cfm (1323 bar at 283.2 L/min)[2]
Optics
MPM unique high speed linear drive system[2]
What it is
General reference — not yet source-verifiedScreen printers apply solder paste through a stencil to the pads of a printed circuit board. The process requires precise alignment between the stencil and the board to ensure accurate paste deposition.
How it works
Print parameters include a snap-off range of -0.050 in to +0.1 in (-1.3 to 2.5 mm), squeegee pressure of 1 lb to 60 lb (0.4 kg to 27 kg) for balanced control head, and squeegee speed of 0.25 in/sec to 12 in/sec (6.35 mm/sec to 305 mm/sec). The printer handles board sizes from 2 in x 1 in (50 mm x 50 mm) to 22 in x 20 in (559 mm x 508 mm) with thickness from 0.015 in to 0.500 in (0.381 mm to 12.7 mm).[2]
Where it fits in the process flow
Board transport height is adjustable from 30 in to 40 in (762 mm to 1016 mm) to interface with upstream and downstream conveyors. The printer can be configured for front- or rear-rail justification.[2]
What do the numbers mean?
Vacuum & pumping1
Optics & imaging1
Dimensions & facilities2
- Printer Dimension (W x D x H)
- 63.0 in (1600.2 mm) wide, 89.0 in (2260.0 mm) deep, 10.0 in (1524 mm + 254 mm) high[2]
Configuration & options7
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Pneumatic Requirements90 psi @ 10 cfm (1323 bar at 283.2 L/min)[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the UP 3000 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the UP 3000 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the UP 3000 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the UP 3000 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the UP 3000 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the UP 3000 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Equipment inventory listing
- [2]ibesmt.com — ibesmt.comibesmt.com
- [3]smtsqueegeeblades.comsmtsqueegeeblades.com
Last updated Sep 23, 2026.
Compare with similar tools
View all →The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
