Micromanipulator
8060 Wafer
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Micromanipulator 8060 Wafer is a wafer prober. The Micromanipulator 8060 Wafer handles 8-inch wafers. The Micromanipulator 8060 Wafer is categorized as Test & Probe.[1][2][3]
What it is
How it works
General reference — not yet source-verifiedWafer probers establish temporary electrical contact between a semiconductor wafer and a tester.
Wafer probers hold the wafer on a chuck and move the stage in precise X-Y steps.
Where it fits in the process flow
General reference — not yet source-verifiedThe Micromanipulator 8060 Wafer sits in wafer-level test and measurement after wafer fabrication steps that create devices but before final package assembly.
The Micromanipulator 8060 Wafer supports probing of individual die on the wafer so electrical checks can be made before downstream assembly.
Applications
What do the numbers mean?
Wafer handling2
Configuration & options4
- Sub Micron[3]
What replaced it?
Alternatives
Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.
- Accretech UF 300— Same function class: Test & Probe, nullCompare in depthsource[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of tool is the Micromanipulator 8060 Wafer?
The Micromanipulator 8060 Wafer is a test and probe wafer prober.[1][3]
What does the Micromanipulator MM 8060 Wafer do at a basic level?
The Micromanipulator MM 8060 Wafer is a wafer prober used for wafer probing.[2]
Not publicly documented
The following facts about the 8060 Wafer are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 8060 Wafer are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 8060 Wafer are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 8060 Wafer are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 8060 Wafer are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 8060 Wafer is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]waferpedia.com — waferpedia.comwaferpedia.com
- [2]MM 8060 Wafer — Micromanipulator | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
- [3]inventory listing
Last updated Oct 5, 2026.
Compare with similar tools
View all →
The Accretech UF 300 is a Test & Probe wafer prober with 8-inch and 12-inch wafer sizes and GPIB interface support.
The KLA 1007 is a wafer prober manufactured by KLA.
