MicroCraft
E 4 H 6151 Flying
What it is
How it works
The MicroCraft E 4 H 6151 configuration includes four Type 7 probes, a Type E CCD camera system, and an MMA controller.[1]
The MicroCraft E 4 H 6151 includes software for test-point generation and error viewing, along with Microsoft Windows 10, high-speed video capture hardware, a barcode printer, and a scan wand.[1]
Where it fits in the process flow
General reference — not yet source-verifiedA flying probe tester sits in printed circuit board test after board fabrication and before downstream assembly use.
Applications
The MicroCraft E 4 H 6151 is configured for bare-board test and probe inspection, and it includes side clamps for E4M, E4H, and 4S6151 models as well as two sets of standard probes.[1]
What do the numbers mean?
Power & electrical1
- Test Point Generator.[1]
Optics & imaging1
- 4 × Type 7 Probes + Type E CCD Camera System[1]
Control & software5
Configuration & options4
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- ConfigurationTest Point Generator.[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the E 4 H 6151 Flying are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the E 4 H 6151 Flying are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the E 4 H 6151 Flying are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the E 4 H 6151 Flying are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the E 4 H 6151 Flying are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the E 4 H 6151 Flying is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]inventory listing
- [2]Equipment inventory listing
Last updated Oct 9, 2026.
Compare with similar tools
View all →The KLA 1007 is a wafer prober manufactured by KLA.
The Electroglas 1034 Prober is a semiconductor wafer prober manufactured by Electroglas.
