Keysight
The Keysight M9410A is a PXIe vector transceiver that functions as both a signal generator and a signal analyzer in a single PXIe module. The M9410A covers a frequency range of 380 MHz to 6 GHz and offers a maximum RF bandwidth of 1.2 GHz. The M9410A provides an SSB phase noise of -129 dBc/Hz at 1 GHz (10 kHz offset) and a maximum output power of +20 dBm at 1 GHz.[1]
The Keysight M9410A is a PXIe vector transceiver. The M9410A is supported by the 89600 VSA software. The M9410A and M9411A family integrates core signal-analysis capabilities with hardware speed and accuracy.[3]
The M9410A and M9411A multichannel setup supports up to 4 channels of synchronous acquisition. Each module must have the MMO option, each module must be the same model, and each module must have the same firmware version. Firmware version M.25.62 or greater is required for multichannel use.[4]
The M9410A and M9411A module supports installation of multiple modules in the same chassis for multichannel measurements. Each module is assigned a HiSLIP VISA address, and the VSA software discovers each module through a unique physics server port.[3]
Process applications and technology nodes documented for this tool.
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| M9411A | — | — | The M9411A has 3 PXI slots and the same 1 MHz to 6 GHz family range stated in the datasheet. | testunlimited.com[2] |
| M9410E | — | — | The M9410E is a combination of two PXI modules, M9410A/M9411A plus M9471A, used together. | helpfiles.keysight.com[3] |
| M9411E | — | — | The M9411E is a combination of two PXI modules, M9410A/M9411A plus M9471A, used together. | helpfiles.keysight.com[3] |
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
No research found yet — worked with this tool? Share what you know.
The M9410A supports installation of multiple M9410A or M9411A modules in the same chassis for multichannel measurements.[3]
A multichannel configuration can be used to achieve up to 4 channels of synchronous acquisition.[4]
Firmware version M.25.62 or greater is required for multichannel use.[4]
The following facts about the M9410A are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the M9410A are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the M9410A are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the M9410A are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the M9410A is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the M9410A are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Last updated Oct 7, 2026.