Disco
DCS 1440 Wafer Cleaner Spin
The Disco DCS 1440 is an automatic cleaning system for cleaning workpieces that have been cut on a dicing saw. The DCS 1440 supports 3- to 8-inch tape and frame workpieces.[1]
What it is
How it works
The DCS 1440 cleans workpieces with a rotary table and cleaning nozzles.[1]
The DCS 1440 allows the cleaning arm sweep speed and cleaning locations to be configured for each cleaning sequence.[1]
The DCS 1440 can use a standard high-pressure cleaning nozzle or an atomizing cleaning nozzle, and the two nozzle types can be mounted in a double-arm configuration.[1]
The DCS 1440 uses a touch-panel interface for operation and cleaning sequence setup.[1]
Where it fits in the process flow
The DCS 1440 sits after dicing saw processing and removes residue from cut workpieces.[1]
Applications
What do the numbers mean?
Power & electrical3
- 50/60 Hz[2]
Vacuum & pumping1
Dimensions & facilities2
Configuration & options12
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What kind of equipment is the DCS 1440?
The DCS 1440 is an automatic cleaning system for cut workpieces.[1]
What process does the DCS 1440 follow?
The DCS 1440 is used to clean workpieces that have been cut on a dicing saw.[1]
What workpiece formats does the DCS 1440 support?
The DCS 1440 supports 3- to 8-inch tape-and-frame workpieces.[1]
Does the DCS 1440 support square workpieces?
The DCS 1440 supports square workpieces up to 250 by 250 mm as an option.[1]
What nozzle options are available on the DCS 1440?
The DCS 1440 can use a standard high-pressure cleaning nozzle or an atomizing cleaning nozzle.[1]
Not publicly documented
The following facts about the DCS 1440 Wafer Cleaner Spin are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DCS 1440 Wafer Cleaner Spin are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the DCS 1440 Wafer Cleaner Spin are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the DCS 1440 Wafer Cleaner Spin are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DCS 1440 Wafer Cleaner Spin are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DCS 1440 Wafer Cleaner Spin is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (6)Every fact above is drawn from these public sources
- [1]disco.co.jp — disco.co.jpdisco.co.jp
- [2]Inventory photo
- [3]Inventory photo
- [4]Inventory photo
- [5]Inventory photo
- [6]Inventory photo
Last updated Oct 9, 2026.
Compare with similar tools
View all →The Glen/YES 1000FP is a plasma cleaning system designed to accept a range of shelf sizes for changing flat panel industry needs.
The 1000P is a plasma cleaning system with four 16 x 16 inch shelves and a total capacity of 1024 square inches.
The Semitool 11600 SRD is a spin rinse dryer manufactured by Semitool.