CHA
Criterion Solution SEC-600/SE-600
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The Criterion Solution SEC-600/SE-600 is a vacuum deposition system model manufactured by CHA Industries.[1]
Where it fits in the process flow
General reference — not yet source-verifiedThin-film deposition is a critical step in semiconductor and optical device fabrication. Deposition systems are used after substrate cleaning and prior to photolithography or etching to create conductive, insulating, or protective layers. The deposited films form part of the device structure.
Applications
General reference — not yet source-verifiedApplications include metallization for semiconductor interconnects, dielectric layer deposition, optical coatings for anti-reflection or mirror coatings, and protective coatings for microelectronics and optoelectronics. The system can be used with a variety of materials including metals, oxides, and dielectrics.
- Precision coating
- Thin-film deposition
- Semiconductor manufacturing
What do the numbers mean?
Vacuum & pumping1
Performance1
Configuration & options1
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- System typeVacuum deposition system[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What product series does the SEC-600/SE-600 belong to?
The SEC-600/SE-600 is part of the Criterion Solution series.[1]
Not publicly documented
The following facts about the Criterion Solution SEC-600/SE-600 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Criterion Solution SEC-600/SE-600 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Criterion Solution SEC-600/SE-600 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Criterion Solution SEC-600/SE-600 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Criterion Solution SEC-600/SE-600 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Criterion Solution SEC-600/SE-600 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]chaindustries.com — chaindustries.comchaindustries.com
Last updated Oct 6, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13622 is an RF match unit intended for PVD (Physical Vapor Deposition) described as a High Efficiency HE RF Match-Bias.
The Applied Materials 0020 12458 Part is an insulator, side match component for the Hdp-Cvd Ultima Plus system.
Applied Materials 0020 18455 is a part described as "Shaft, Rf In Local Match, Hdpcvd, Rev3."