Applied Materials
Producer GT Metal
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Applied Materials Producer GT Metal is a chemical vapor deposition semiconductor manufacturing tool configured for TiN MCVD on 12-inch wafers.[1][2]
What it is
The Applied Materials Producer GT Metal is a chemical vapor deposition semiconductor manufacturing tool.[2]
How it works
General reference — not yet source-verifiedA chemical vapor deposition system introduces precursor gases and a carrier gas into a reaction chamber. The substrate is heated to a temperature that promotes chemical reactions or decomposition on its surface, forming a solid film. Unreacted gases and volatile byproducts are removed by a vacuum pump and exhaust system to maintain the reaction environment.
Where it fits in the process flow
General reference — not yet source-verifiedThin-film deposition systems are used in semiconductor fabrication after wafer cleaning and surface preparation, and before photolithography and etching steps. Deposited films can serve as dielectrics, conductive layers, diffusion barriers, or seed layers for subsequent processes.
Applications
General reference — not yet source-verifiedCVD systems can deposit a range of metals, refractory compounds, and conductive nitrides. Titanium nitride films are often used as diffusion barriers and wear-resistant coatings in semiconductor manufacturing.
What do the numbers mean?
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- TypeCVD (Chemical Vapor Deposition)[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of equipment is the Applied Materials Producer GT Metal?
It is a chemical vapor deposition semiconductor manufacturing tool.[1]
Not publicly documented
The following facts about the Producer GT Metal are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Producer GT Metal are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Producer GT Metal are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Producer GT Metal are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Producer GT Metal are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Producer GT Metal is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]inventory listing
- [2]Producer GT Metal — Applied Materials | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
Last updated Oct 12, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13622 is an RF match unit intended for PVD (Physical Vapor Deposition) described as a High Efficiency HE RF Match-Bias.
The Applied Materials 0020 12458 Part is an insulator, side match component for the Hdp-Cvd Ultima Plus system.