Agilent
8112 A Pulse
The Agilent 8112 A is a pulse generator. The Agilent 8112 A operates on line voltages of 100/120/220/240 V with a frequency range of 45–440 Hz and maximum power of 120 VA.[1][2]
Plate 01HP/Agilent 8112A Pulse Generator
Bancroft12194Watch on YouTubePlate 02HP Agilent Keysight 8112A 50MHz Pulse Generator
AssetRelayWatch on YouTubePlate 03#1651 HP 8112A 50 MHz Pulse Generator (part 1 of 4)
IMSAI GuyWatch on YouTube
What it is
How it works
General reference — not yet source-verifiedA pulse generator creates timed voltage transitions with set repetition characteristics so circuits and instruments can be stimulated under repeatable conditions.
Where it fits in the process flow
General reference — not yet source-verifiedPulse generators are used in bench test and probe environments to drive devices, verify timing behavior, and support electrical characterization before production release.
Applications
General reference — not yet source-verifiedPulse generators are used for electronic characterization, timing checks, and signal-response testing in development and laboratory settings.
What do the numbers mean?
Power & electrical23
Configuration & options9
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Line100/120/220/240v[1]
- Fuse (100/120v)1.5a[1]
- Fuse (220/240v)750ma[1]
- Configuration100/120/220/240 V[3]
- Configuration48–440 Hz[3]
- Configuration100/120v 1.5a[3]
- Configuration220/240v 750ma[3]
- Configuration100/120v~[6]
- Configuration55–100 Hz[6]
- Configuration45–440 Hz[6]
- Fuse750 Ma (For 100/120v)[6]
- Line100/120/220/240 V[2]
- Line48–440 Hz[2]
- Fuse100/120 V 1.5 A[2]
- Fuse220/240 V 750 Ma[2]
- Line Voltage100/120/220/240 V[1]
- Fuse (100/120 V)1.5 A[1]
- Fuse (220/240 V)750 mA[1]
- Frequency48–440 Hz[9]
- TypePulse generator[2]
- Frequency55–100 Hz; 45–440 Hz[6]
- Fuse1.5 A for 100/120 V[2]
- Fuse750 mA for 220/240 V[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the 8112 A Pulse are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 8112 A Pulse are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 8112 A Pulse are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 8112 A Pulse are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 8112 A Pulse are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 8112 A Pulse is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (9)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]inventory listing
- [3]Inventory photo
- [4]Inventory photo
- [5]Inventory photo
- [6]Inventory photo
- [7]Inventory photo
- [8]Inventory photo
- [9]Inventory photo
Last updated Oct 3, 2026.
Compare with similar tools
View all →The KLA 1007 is a wafer prober manufactured by KLA.
The Electroglas 1034 Prober is a semiconductor wafer prober manufactured by Electroglas.
