Multitest

The Multitest InStrip Handler is a semiconductor test handler for strip-based devices.

The Multitest 9928 is a handler used in semiconductor test and probe operations.

The Multitest MT 9510 XP is a pick-and-place handler designed for tri-temp testing of semiconductor devices, with temperature accuracy demonstrated for BGA packages.

The Multitest MT 9510 Tri-Temp Test Handler is a tri-temperature semiconductor test handler introduced in 2003–2004, with up to 16 parallel test sites and a temperature range of -55°C to +150°C.

The Multitest MT 9320 is a semiconductor test handler categorized as Test & Probe.

The Multitest MT 2168 XT is a semiconductor test handler that runs on the QNX operating system.

The Multitest MT 8704 is a test handler.

The Multitest MT 9308 SO is a handler used in semiconductor test and probe operations.

The Multitest InStrip Parallel Strip Test Handler is a high parallel test handling solution for strips and singulated devices that utilizes the InCarrier concept.

The Multitest MT 8501 is a test handler from Multitest in the Test & Probe equipment category.

The Multitest MT93xx is a gravity handler for testing SO and MLF/QFN packages with 4 contact sites, tri-temp operation from -55 to 155°C, and maximum throughput of 20,500 uph.

The Multitest 9510 XP Tri-Temp is a semiconductor test handler.

The Multitest MT8589 is a gravity handler with dual contact site, tri-temperature operation from -55 to 155 °C, and maximum throughput of 4,800 uph.

The Multitest MT 9510 STD is a handler described with temperature and high-voltage capabilities.

The Multitest MT 9308 is a handler identified by model name MT 9308 and make Multitest.

The Multitest MT 2168 is a semiconductor device handler that was the first to comply with STC standards for docking and interfaces, enabling multi-vendor interoperability.

The Multitest MT 9038 is a handler described as a hot test handler with VIP Kelvin contact unit and SO8 HD test capability.