Comparison ledger
JDSU SC Series, KLA 1007, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | SC SeriesJDSU | 1007KLA |
|---|---|---|
| OEM | JDSU | KLA |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | JDSU SC Series | KLA 1007 |
| Cited variants | — | |
| Specifications | ||
| Type | Programmable fiberoptic switch[1] | — |
| Architecture | 1xN switch[1] | — |
| Channel capacity | Up to 180 output channels[1] | — |
| Versions | Single-mode and multimode versions available[1] | — |
| Interfaces | IEEE 488.1 parallel interface and RS232C serial interface[1] | — |
| Typical insertion loss | 0.4 dB[1] | — |
| Typical repeatability | 0.003 dB[1] | — |
| Typical return loss | Greater than 65 dB[1] | — |
| Applications | Fiberoptic component testing, transmitter/receiver measurement, research and development[1] | — |
| RS232 data protocol | 1200 baud, ASCII, 8 bits per character, 1 stop bit, no parity[1] | — |
| Drivers | Eight open collector outputs[1] | — |
| Driver current | 100 mA maximum per output[1] | — |
| Input voltage | 110/115/230/240V AC, 50 to 60 Hz[1] | — |
| Power consumption | 100 VA maximum[1] | — |
| Operating temperature | 0 to 55 °C[1] | — |
| Storage temperature | -40 to 70 °C[1] | — |
| Humidity | Maximum 95% RH from 0 to 55 °C[1] | — |
| Weight | Single-height 9 kg; double-height 14 kg[1] | — |
| Manufacturer | — | KLA[2] |
| Model | — | 1007[2] |
| Description | — | Wafer Prober[2] |
| Wafer size | — | 150 mm[2] |
| Convertible to 8 inch wafer size | — | Yes[2] |
| Vintage | — | 01.06.1995[2] |
| Make | — | KLA[3] |
| Equipment type | — | Prober[3] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →