Comparison ledger
Dek NeoHorizon 03 ix, Speedline Momentum Elite, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | Momentum EliteSpeedline | |
|---|---|---|
| OEM | Dek | Speedline |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Dek NeoHorizon 03 ix | Speedline Momentum |
| Cited variants |
|
|
| Specifications | ||
| Operating System | Win7+09SP16[4] | — |
| Tooling | Magnetic tooling pins[4] | — |
| Camera type | Hawkeye 750[4] | — |
| Configuration | 400 mm cleaning unit[4] | 50/60 Hz[9] |
| Board foil clamp size | 500mm[4] | — |
| Transport System Type | Front Rail Fixed and board clamp[4] | — |
| Transport System Direction | System setup[4] | — |
| PCB thickness | 0.2-6mm[4] | — |
| PCB Weight | 0-1kg[4] | — |
| Screen Frame Size | 736x736mm[4] | — |
| Print Modes | Standard Print head[4] | — |
| Machine Alignment Capability | 2.0@±25microns[4] | — |
| Voltage | AC 220V 50/60Hz[4] | — |
| Fiducial setup | Automatic fiducial setup; small fiducial setup[4] | — |
| Printing surface | 510 mm (X) × 508.5 mm (Y)[6] | — |
| Weight | Approx. 690 kg depending on selected options[6] | — |
| Wet print capability | ±25 µm[6] | — |
| Machine alignment capability | ±12.5 µm @ 2.0 cmk[6] | — |
| System alignment capability | +/- 20 µm @ 2.0 cmk[6] | — |
| Core cycle time | 8 sec.[6] | — |
| Maximum printing surface | 510 mm (X) × 508.5 mm (Y)[7] | — |
| Standard cycle time | 6.5 seconds + process[7] | — |
| Camera | DEK HawkEye 750 digital camera with 2-way LED illumination[7] | — |
| Stencil loading | Semi-automatic, incl. squeegee drip catcher[7] | — |
| Stencil alignment | Motorized (actuators); aligned on X- and Y-axis and rotation[7] | — |
| Understencil cleaning | DEK IUSC 300 mm/400 mm/520 mm[7] | — |
| Operating system | Windows 7 Standard embedded[8] | — |
| Maximum print area | 510 mm x 508.5 mm[8] | 609.6 mm x 508 mm (24 in x 20 in)[11] |
| Screen frame size | 736 mm x 736 mm[8] | — |
| Substrate thickness | 0.2 mm to 6 mm[8] | — |
| Substrate weight maximum | 1 kg[8] | — |
| Process alignment accuracy | ±25 µm @ 2.0 Cpk[8] | — |
| Vision system | Cognex fiducial recognition[8] | — |
| Power supply | 100 Volts to 240 Volts ±10%, single phase 50/60 Hz[8] | — |
| Approximate weight | 690 kg unboxed[8] | — |
| Largest Single Load | — | 6 Amps[9] |
| Full Load Current | — | 10 Amps[9] |
| Maximum Board Size (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[1] |
| Maximum Board Size (X x Y) in Staging Mode (Momentum Elite) | — | 457 mm x 508 mm (18" x 20")[1] |
| Minimum Board Size (X x Y) | — | 50.8 mm x 50.8 mm (2" x 2")[1] |
| Board Thickness | — | 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp foils[1] |
| Maximum Print Area (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[1] |
| Print Gap (Snap-off) | — | 0 mm to 6.35 mm (0" to 0.25")[1] |
| Stencil Frame Size | — | 737 mm x 737 mm (29" x 29")[1] |
| Vision Field-of-View (FOV) | — | 106 mm x 8 mm[1] |
| Total System Alignment | — | 12.5 microns[1] |
| Alignment Repeatability | — | ±0.0005" at 6 sigma, Cpk of greater than or equal to 2.0[1] |
| Power Requirements | — | 200 to 240 VAC Single Phase 50/60Hz[1] |
| Air Supply | — | 100 PSI at 4 CFM[1] |
| Dimensions (W x D x H) | — | 1675.5 mm (65.96") x 1593.1 mm (62.72") x 1638.4 mm (64.5")[1] |
| Machine Weight | — | 899 kg (1982 lbs)[1] |
| Wet Print Accuracy | — | 20 microns @ 6 sigma, Cpk > 2[10] |
| Maximum Board Weight | — | 4.5 kg (9.92 lbs)[10] |
| Board Edge Clearance | — | 3.0 mm (0.118")[10] |
| Underside Clearance | — | 12.7 mm (0.5") standard / Configurable for 25.4 mm (1.0")[10] |
| Equipment type | — | Screen printer[9] |
| Maximum board size | — | 609.6 mm x 508 mm (24 in x 20 in)[10] |
| Staging mode board size | — | 457 mm x 508 mm (18 in x 20 in)[10] |
| Minimum board size | — | 50.8 mm x 50.8 mm (2 in x 2 in)[10] |
| Board thickness | — | 0.2 mm to 5.0 mm, up to 6.0 mm without top clamp foils[10] |
| Print gap (snap-off) | — | 0 mm to 6.35 mm (0 in to 0.25 in)[11] |
| Stencil frame size | — | 737 mm x 737 mm (29 in x 29 in)[11] |
| Vision field of view | — | 106 mm x 8 mm[11] |
| Camera system | — | Single digital camera (look up/down vision)[11] |
| Accuracy and repeatability | — | ±0.0005 in at 6 sigma, Cpk >= 2.0[11] |
| Power requirements | — | 200 to 240 VAC single phase, 50/60 Hz, 15 A[11] |
| Dimensions | — | 1675.5 mm W x 1593.1 mm D x 1638.4 mm H[11] |
| Machine weight | — | 899 kg (1982 lb)[11] |
| Load current | — | Largest single load: 6 A; full load current: 10 A[9] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →