Comparison ledger
Dek Horizon 03 i, Speedline Momentum Elite, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | Horizon 03 iDek | Momentum EliteSpeedline |
|---|---|---|
| OEM | Dek | Speedline |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Dek Horizon 03 | Speedline Momentum |
| Cited variants | — |
|
| Specifications | ||
| Configuration | 50/60 Hz[3] | 50/60 Hz[6] |
| Board Minimum Size | 40 x 50mm[4] | — |
| Board Maximum Size | 510 x 508mm[4] | — |
| Board Thickness | 0.2mm - 6mm[4] | 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp foils[1] |
| Board Maximum Weight | 1Kg[4] | — |
| Underside Component Clearance | Up to 8mm including PCB thickness[4] | — |
| Print Speed | 2mm - 150mm/sec[4] | — |
| Print Pressure | 0 - 20kg[4] | — |
| Print Gap | 0 - 6mm, programmable[4] | — |
| Stencil Separation Speed | 0.1 - 20mm/sec[4] | — |
| Stencil Separation Distance | 0 - 3mm[4] | — |
| Process Capability | 1.33 Cpk @ ±25µm Including Process[4] | — |
| Alignment Cycle Time | 14 secs (12 secs with Speedup)[4] | — |
| Product Changeover | 2 minutes[4] | — |
| New Product Set Up | <10 minutes[4] | — |
| Vision System | Cognex[4] | — |
| Operating System | Windows XP[4] | — |
| Power Supply Voltage | 115 volts +/- 10% at 20 amps or 230 volts +/- 10% at 10 amps, single phase 50/60Hz[4] | — |
| Air Supply | 5 - 8 bar at 5 Litres/min, ISO 8573.1 class 2.3.3[4] | 100 PSI at 4 CFM[1] |
| Operating Temperature | 10 - 35°C (50 - 95°F)[4] | — |
| Operating Humidity | 30 - 70% Relative Humidity (non condensing)[4] | — |
| Weight | 800kg (1760lbs)[4] | — |
| Dimensions (L x W x H) | 2050mm x 1500mm x 1570mm[4] | — |
| Screen Frame Type | DEK 265 (736 x 736 x 38/40mm external, 660 x 660mm internal)[4] | — |
| Screen Frame Standard | 29" x 29" / 26" x 26"[4] | — |
| Stencil Mount Adjustment | Configurable between 29" to 12" in under 2 secs[4] | — |
| Transport Conveyor Max Height | 3mm - 42mm programmable[4] | — |
| Fiducial Size | 0.5mm - 3.0mm[4] | — |
| Certification | CE (98/37/EC, 89/336/EEC, 73/23/EEC, 2003/10/EC)[4] | — |
| Equipment type | Screen printer[5] | — |
| Make | Dek[5] | — |
| Model | Horizon 03 i[5] | — |
| Vintage | 2009[3] | — |
| Power | 50/60 Hz - 230 Volt[3] | — |
| Screen frame standard | DEK 265[4] | — |
| External screen frame size | 736 x 736 x 38/40mm[4] | — |
| Internal screen frame size | 660 x 660mm (26" x 26")[4] | — |
| Minimum board size | 40 x 50mm[4] | — |
| Maximum board size | 510 x 508mm[4] | — |
| Largest Single Load | — | 6 Amps[6] |
| Full Load Current | — | 10 Amps[6] |
| Maximum Board Size (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[1] |
| Maximum Board Size (X x Y) in Staging Mode (Momentum Elite) | — | 457 mm x 508 mm (18" x 20")[1] |
| Minimum Board Size (X x Y) | — | 50.8 mm x 50.8 mm (2" x 2")[1] |
| Maximum Print Area (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[1] |
| Print Gap (Snap-off) | — | 0 mm to 6.35 mm (0" to 0.25")[1] |
| Stencil Frame Size | — | 737 mm x 737 mm (29" x 29")[1] |
| Vision Field-of-View (FOV) | — | 106 mm x 8 mm[1] |
| Total System Alignment | — | 12.5 microns[1] |
| Alignment Repeatability | — | ±0.0005" at 6 sigma, Cpk of greater than or equal to 2.0[1] |
| Power Requirements | — | 200 to 240 VAC Single Phase 50/60Hz[1] |
| Dimensions (W x D x H) | — | 1675.5 mm (65.96") x 1593.1 mm (62.72") x 1638.4 mm (64.5")[1] |
| Machine Weight | — | 899 kg (1982 lbs)[1] |
| Wet Print Accuracy | — | 20 microns @ 6 sigma, Cpk > 2[7] |
| Maximum Board Weight | — | 4.5 kg (9.92 lbs)[7] |
| Board Edge Clearance | — | 3.0 mm (0.118")[7] |
| Underside Clearance | — | 12.7 mm (0.5") standard / Configurable for 25.4 mm (1.0")[7] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →