Comparison ledger
Cascade Microtech 103-754, Electroglas EG 4090 u Automatic Wafer, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 103-754Cascade Microtech | EG 4090 u Automatic WaferElectroglas |
|---|---|---|
| OEM | Cascade Microtech | Electroglas |
| Category | Test & Probe | Test & Probe |
| Wafer size | 6-inch diameter microchamber and thermal chuck | Wafer Profiler Kit |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Cascade Microtech 103-754 | Electroglas EG 4090 |
| Cited variants | — |
|
| Specifications | ||
| type | x-y-z-θ probe positioner[2] | — |
| installed on | HFTL 50-GHz Small-Signal Probe Station[2] | — |
| quantity in station | two[2] | — |
| station chuck size | 6-inch-diameter microchamber and thermal chuck[2] | — |
| Quantity per station | Two positioners[2] | — |
| Chuck size | 6-inch-diameter microchamber and thermal chuck[2] | — |
| Temperature range | -50 to 200 °C[2] | — |
| Configuration | — | For Parts[3] |
| Temperature Range | — | Ambient ~ +130 degree C[1] |
| Wafer size | — | Wafer Profiler Kit[1] |
| Voltage | — | 220VAC, 50 / 60 Hz & Single Phase Input Voltage[1] |
| Type | — | Automatic Wafer Prober[4] |
| Wafer Stage Size | — | 8 inch X-Y Stage[1] |
| Hot Chuck Size | — | 8 inch Standard Hot Chuck Top Assy[1] |
| Hot Chuck Temperature Range | — | Ambient ~ +130°C[1] |
| Vision Module | — | Dual Optic Bridge CCD Camera Assembly[1] |
| Wafer Profiler Kit | — | Included[1] |
| Ring Carrier Plate | — | RC 2[1] |
| Probe Card Holder | — | RTGR 2[1] |
| Cassette Loader | — | Right Side Single Cassette Loader[1] |
| Control Module | — | Display Control Module with Windows EGC Version 7 or Higher[1] |
| Display | — | LCD Touch Screen Monitor[1] |
| Z-Stage | — | PZ 7 Z-Stage, 0.125 MIL or 0.25 MIL Z Resolution[1] |
| Alignment | — | PTPA (Probe to Pad Alignment), PTPO[1] |
| Interfaces | — | RS 232, GPIB & TTL Tester Interface[1] |
| Input Voltage | — | 220VAC, 50/60 Hz, Single Phase[1] |
| Scrub Pad | — | Included[1] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →