Comparison ledger
Applied Materials 0010-21246 Part, Plasma-Therm Powermax85 SYNC, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-21246 PartApplied Materials | Powermax85 SYNCPlasma-Therm |
|---|---|---|
| OEM | Applied Materials | Plasma-Therm |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Plasma-Therm Powermax85 SYNC |
| Specifications | ||
| Product family | — | Powermax SYNC[1] |
| System type | — | plasma cutting and gouging system[1] |
| Output current | — | 25-85 A[2] |
| Recommended cutting capacity | — | 25 mm (1 in.)[2] |
| Severance cutting capacity | — | 32 mm (1-1/4 in.)[2] |
| Pierce capacity | — | 20 mm (3/4 in.)[2] |
| Weight with 25 ft torch | — | 32 kg (67 lbs.)[2] |
| Input voltage | — | 200-480 V, 1-PH, 50/60 Hz; 200-600 V, 3-PH, 50/60 Hz[2] |
| Duty cycle | — | 60% @ 85 A, 230-600 V, 3-PH; 60% @ 85 A, 480 V, 1-PH; 50% @ 85 A, 240 V, 1-PH; 50% @ 85 A, 200-208 V, 3-PH; 40% @ 85 A, 200-208 V, 1-PH; 100% @ 66 A, 230-600 V, 1/3-PH[2] |
| Rated output voltage | — | 143 VDC[2] |
| Open circuit voltage | — | 305 VDC[2] |
| Gas supply | — | Clean, dry, oil-free air or nitrogen[2] |
| Input power cable length | — | 3 m (10 ft)[2] |
| Power supply type | — | Inverter-IGBT[2] |
| Engine drive requirement | — | 20 kW or 25 kVa for full 85 A output[2] |
| Electrical efficiency | — | 91.9%[2] |
| Warranty | — | Power supply: 6-year; torch: 1-year[2] |