Waferpedia

Comparison ledger

0010-03254 E ChuckversusAccela

Applied Materials 0010-03254 E Chuck, MPM Accela, side by side. Every value shown is drawn from the cited encyclopedia entries.

Side-by-side comparison of selected equipment models
Attribute
0010-03254 E ChuckApplied Materials
OEMApplied MaterialsMPM
Category——
Wafer size——
Process node——
Introduced——
Production run——
Lifecycle——
Lifecycle milestones——
Control system——
Generation——
Family—MPM Accela
Specifications
Maximum Board Size (X x Y)—558 mm x 508 mm (22” x 20”)[1]
Minimum Board Size (Y x X)—50.8 mm x 50.8 mm (2” x 2”)[1]
Maximum Board Weight—7 kg (15 lb)[1]
Board Edge Clearance—Configurable to 3 mm (0.120”) or 5 mm (0.200”)[1]
Transport Speed—8 mm/sec to 1270 mm/sec (0.3”/sec to 50”/sec)[1]
Transport Height From Floor—813 mm to 1041 mm (32” to 41”)[1]
Transport Track Feed Direction—Left-Right, Right-Left, Right-Right, Left-Left[1]
Maximum Print Area (X x Y)—558 mm x 508 mm (22” x 20”)[1]
Snap-off—-0.025 mm to 12.7 mm (-0.001” to 0.500”)[1]
Print Speed—6 mm/sec to 305 mm/ sec (0.25”/sec to 12”/sec)[1]
Print Force—0.4 kg to 22 kg (0.9 lb to 50 lb)[1]
Print Stroke—±280 mm (±11”) from center[1]
Stencil Frame Size—737 mm x 737 mm (29” x 29”) adjustable to 584mm x 584 mm, (23” x 23”) for tubular frames[1]
Vision Field-of-View (FOV)—10.6 mm x 8.0 mm (0.417” x 0.315”)[1]
Total System Alignment—±12.5 microns Accuracy and Repeatability (±0.0005”) at 6 sigma, Cpk of greater than or equal to 2.0[1]
Wet Print Deposit—±25 microns Accuracy and Repeatability (±0.001”) at 6 sigma, Cpk of greater than or equal to 2.0[1]
Cycle Time—Less than 5.5 sec[1]
Power Requirements—200 to 240 V AC (±10%) single phase @ 50/60Hz, 15A[2]
Machine Weight—2205 kg (4850 lb)[1]
Width—1357 mm (53.4")[2]
Depth—2169 mm (85.4")[2]
Height (excluding light tower)—1950 mm (76.7")[2]
Sources (2)Every fact above is drawn from these public sources
  1. [1]smtdevices.comsmtdevices.com
  2. [2]islandsmt.comislandsmt.com